![]() ![]() Hosts on NVIDIA may get better encode latency by setting Parsec to maximum performance in the NVIDIA Control Panel.Make sure to restart the computer to properly apply the change.(For paid users) Having 4:4:4 color accuracy activated may increase the load considerably in some cases.Check the guest requirements section here for more info Turn off 4:4:4 and check if the stream has improved. Network is the ping between the guest and host. The more latency you have, the more time it takes for you to press a button and see it on the host. ![]() Below 30ms is good, and below 60ms is still fine for most people. Both sides should use an Ethernet cable or ensure you're using 5ghz Wi-Fi.If this number is constantly varying a lot, it's also a sign the connection isn't reliable. If you're not physically too far away, the route being taken by your connections may be currently poor.Parsec unfortunately isn't able to break the laws of physics yet You may be physically too far away from each other.VPNs can introduce additional latency and should be avoided if possible.If you're using Wi-Fi and you can at least test an ethernet cable for a moment, try it out and see if your situation improvesĪvoid signal boosters, Ethernet over power line or mesh Wi-Fi systems. This is unfortunately basically out of your control. Or, either side's connection may be poor in other ways that are covered in the network reliability part of this article, below. ![]()
0 Comments
Leave a Reply. |